Hotpoint Washing Machine Error Codes Explained (Full List + Fixes)
Posted by KGA-SUPPLIES on 23rd Mar 2026
Hotpoint Washing Machine Error Codes – What They Mean & How To Fix Them
If your Hotpoint washing machine is showing an error code, this guide explains exactly what’s wrong and how to fix it.
Many Hotpoint faults are caused by simple issues like blocked filters or worn parts — meaning you may not need an engineer.
? Most Common Hotpoint Error Codes
❌ F05 – Pump / Drain Blockage
Meaning: The machine cannot drain water.
Most common cause:
- Blocked filter
- Kinked hose
- Pump obstruction
DIY difficulty: Easy
Fix:
- Clean the pump filter
- Check drain hose for blockages
? This is the MOST common Hotpoint error and often a quick fix.
❌ F06 – Door Lock Fault
Meaning: The door is not locking properly.
Most common cause:
- Faulty door interlock
- Wiring issue
DIY difficulty: Easy–Medium
Fix:
- Check door is fully closed
- Replace door lock if faulty
❌ F01 – Electronic Circuit Board Failure
Meaning: A fault with the main control board.
Most common cause:
- Power surge
- PCB damage
DIY difficulty: Hard
⚠️ Usually requires replacement parts or professional repair.
? Full Hotpoint Error Code List
⚡ Electrical & Control Faults
❌ F01 – PCB Failure
Control board damaged or shorted.
❌ F09 – Software Error
Corrupted configuration settings.
❌ F12 – Communication Error
Fault between control boards or wiring.
❌ F18 – Internal Control Fault
Main board microprocessor issue.
⚙️ Motor & Mechanical Faults
❌ F02 – Motor Circuit Fault
Worn brushes or motor failure.
?️ Heating & Sensor Faults
❌ F03 – Temperature Sensor Fault
Faulty NTC sensor.
❌ F07 – Heater Circuit Fault
Triac or PCB failure.
❌ F08 – Heater Relay Fault
Heater element or relay issue.
? Drainage & Pump Faults
❌ F05 – Pump / Drain Blockage
Blocked filter or faulty pump.
❌ F11 – Pump Error
Pump failure or obstruction.
? Door & Lock Faults
❌ F06 – Door Lock Fault
Faulty interlock or wiring.
? Dryer (Washer Dryer Models)
❌ F13 – Dryer Temperature Sensor Fault
NTC sensor issue.
❌ F15 – Dryer Heater Relay Fault
Control or relay issue.
? Drum & Safety Faults
❌ F16 – Drum Lock Fault (Top Loaders)
Drum lock jammed or faulty.
? When Should You Replace a Part?
If your Hotpoint washing machine:
- Keeps showing the same error
- Stops mid-cycle
- Won’t start or drain
…it’s usually a sign a component needs replacing.
Common Hotpoint spare parts:
- Drain pumps
- Door locks
- Heating elements
- Carbon brushes
? Replacing a part is often much cheaper than replacing the appliance.
?️ Need Hotpoint Spare Parts Fast?
At KGA Supplies, we supply genuine and compatible Hotpoint washing machine spares.
✅ Fast UK delivery
✅ Huge stock range
✅ Trusted supplier
? Browse Hotpoint spare parts today and get your appliance back up and running.
? Pro Tip
Before replacing parts:
- Turn off power
- Check filters and hoses first
- Confirm the exact error code
A simple fix could save you £100+.