Beko Washing Machine Error Codes – What They Mean & How To Fix Them

If your Beko washing machine is showing an error code, this guide explains what it means and how to fix it.

Many Beko faults are simple issues like blockages, unbalanced loads, or door problems — meaning you can often fix them yourself without calling an engineer.

---

? Most Common Beko Error Codes

---

❌ E5 – Drainage Issue

Meaning: The washing machine is not draining properly.

Causes:

• Blocked pump filter
• Kinked hose
• Faulty pump

Fix:

• Clean the pump filter
• Check hose for blockages

? One of the most common Beko faults.

---

❌ E4 – Not Filling With Water

Meaning: The machine is not filling with water.

Causes:

• Faulty water valve
• Blocked inlet
• Door not properly closed

Fix:

• Check water supply
• Ensure door is fully shut

---

❌ E9 – Door Lock Fault

Meaning: The door is not locking correctly.

Causes:

• Faulty door lock
• Obstruction in door

Fix:

• Check for trapped clothing
• Replace door lock if needed

---

---

? Full Beko Error Code List

?️ Heating & Sensor Errors

❌ E1 – NTC / Thermistor Fault

Problem with temperature sensor or wiring.

? Expected reading: ~4,700 ohms at 25°C

---

❌ E2 – Heater Fault

Likely wiring or heater issue.
⚠️ May require professional repair.

---

❌ E3 – Continuous Heating Fault

Heater running constantly, often control board issue.

---

? Water & Drainage Errors

❌ E4 – Not Filling

Water supply or valve issue.

❌ E5 – Not Draining

Blocked filter or pump fault.

❌ E8 – Water Fill Issue

Similar to E4, supply problem.

---

⚙️ Motor & Mechanical Errors

❌ E6 – Motor Fault

Machine may shake or not spin properly.

❌ E11 – Motor Error

Motor-related issue requiring repair.

---

? Sensor & Control Errors

❌ E7 – Sensor Fault

Machine may empty immediately or not start.

---

? Door & Lock Errors

❌ E9 – Door Lock Fault

Door not locking correctly.

❌ E10 – Door Jam

Obstruction preventing door closure.

---

? Load & Usage Errors

❌ E17 – Too Much Foam

Excess detergent detected.

Fix:

• Run rinse cycle
• Use less detergent

---

❌ E18 – Load Imbalance

Uneven load inside drum.

Fix:

• Redistribute clothes
• Restart cycle

---

? When Should You Replace a Part?

If your Beko washing machine:

• Keeps showing the same error
• Stops mid-cycle
• Won’t drain, spin, or heat

…it’s likely a component needs replacing.

Common Beko spare parts:

• Drain pumps
• Door locks
• Heating elements
• Sensors

? Replacing a part is often far cheaper than replacing the appliance.

---

?️ Need Beko Spare Parts Fast?

At KGA Supplies, we stock a wide range of Beko washing machine spare parts.

✅ Fast UK delivery
✅ Huge stock range
✅ Trusted supplier

? Browse Beko spare parts today.

---

? Pro Tip

Before replacing parts:

• Turn off power
• Check filters and hoses first
• Confirm the exact error code

A simple fix could save you £100+.